Starting at 500 pounds (227 Kgs) and going up to 8000 pounds (1818 Kgs) (not shown), all of Servos & Simulation three axis (DOF) motion platforms are generic and completely customizable.

Designed typically for military and commercial applications, the three axis motion platform systems are fully electric, digitally controlled and are virtually maintenance free. Highly efficient and with the lowest cost of ownership in the industry, these systems will provide decades of worry free service. Clean and environmentally green, these systems are highly reliable, safe and have a proven design. With a totally sealed design, these systems can be operated in the most abusive and harshest conditions.

Applications for the three axis (DOF) motion base system include but are not limited too, flight simulation (FTD's), entertainment and amusement rides, medical and scientific research and test systems.

All specifications listed below are for generic systems only. We can customize the system to have higher angles and higher accelerations then those listed below. 

Product Data Sheet - 710-3-500 Video - 710-3-1000 Video - 710-3-2000 Video

Mechanicals:

All 1000 pound payload and above systems come with integrated forklift openings for ease of installation. 

	710-3-500-220	710-3-1000-220	710-3-2000-220	710-3-4000-220
Payload	500 Lbs (227 Kgs)	1000 Lbs (454 Kgs)	2000 Lbs (909 Kgs)	4000 Lbs (1818 Kgs)
Center of Gravity	Centered directly over the center post of the motion base
Top Platform Dimensions	14" x 14"	48" x 39"	48" x 39"	48" x 39"
Floor Platform Dimensions	18" x 18"	60" x 36"	60" x 36"	60" x 36"
Height (std)	12"	24" or less	24"	28"
Weight (std ship weight)	15 Lbs	700 Lbs	800 Lbs	1750 Lbs

All top platforms are customizable at contract time. Please contact our engineering department for more information.

Dynamics:

All dynamics are completely customizable per customer specification. Those listed below are for generic systems.

	Units	710-3-500-220	710-3-1000-220	710-3-2000-220	710-3-4000-220
Max. Roll Angle	degrees	±15˚	±20˚	±20˚	±20˚
Max. Roll Velocity	degrees / sec	±60	±60	±60	±60
Max. Roll Acceleration	degrees / sec^2	±300	±300	±300	±300
Max. Pitch Angle	degrees	±15˚	±20˚	±20˚	±20˚
Max. Pitch Velocity	degrees / sec	±60	±60	±60	±60
Max. Pitch Acceleration	degrees /sec^2	±300	±300	±300	±300
Max. Veritcal Translation	inches	±4 (total 8)	±4 (total 8)	±4 (total 8)	±4 (total 8)
Max. Vertical Velocity	inch / sec	±13	±13	±13	±13
Max. Vertical Acerlation	g (force of gravity)	0.4	0.4	0.4	0.4

Safety Systems:

All systems come with an integrated braking and emergency stop system. If power is lost to the system, the brakes automatically engage to prevent damage to the system. Position Feedback to the computer is available at contract time to allow for soft start conditions.

Power Requirements:

All systems require 200VAC and can be wired for a 110 environment with the use of a transformer. This option is available at contract time and may be retro-fitted to existing systems.