Six Axis Motion Seat
Standard Six
Axis Motion Seat - Click on Picture for Video (QuickTime)
This six axis miniature motion seat is designed
typically for military and commercial applications, but is inexpensive enough to
be used in the entertainment industry.
| Applications: |
Features: |
Advantages Over Hydraulics: |
- Simulators
- Flight Training Systems
- Entertainment Rides
- Medical Research
- Test Systems
|
- ALL ELECTRIC
Actuators
- Sealed Mechanical Design
- Dynamic Braking
- Electronic Limits
- Digital Computer Control
- Computer Displayed position info
|
- LOW COST!!!
- Portable, easy setup
- Quiet, Clean, Efficient Operation
- Simple Maintenance
- No Hydraulic Fluid
- No Pump Room
- No Plumbing
|
Specifications:
Mechanical:
| Payload Weight: |
500 Lb. |
| Payload Center of Gravity: |
centered directly over the triad |
| Motion Frame Dimensions (std): |
Equilateral triangle; 12 inches
per side |
| Floor Frame Dimensions (std): |
26 inch circular footprint |
| Height (std): |
20" to top of upper frame |
| Weight (std): |
200 Lb. |
Dynamics:
| Limits of
Motion: |
| Roll: |
±13° |
| Pitch: |
±13° |
| Yaw: |
±9.5° |
| Heave: |
± 1.5 inches |
| Surge: |
± 1.5 inches |
| Sway: |
± 1.5 inches |
|
Velocities: |
| Roll: |
± 30° per second |
| Pitch: |
± 30° per second |
| Yaw: |
± 30° per second |
| Heave: |
± 10" per second |
| Surge: |
± 10" per second |
| Sway: |
± 10" per second |
|
Accelerations: |
| Roll: |
± 140° per second per second |
| Pitch: |
± 140° per second per second |
| Yaw: |
± 140° per second per second |
| Heave (up/down): |
0.4 g |
| Surge (fore/aft): |
0.4 g |
| Sway (left/right): |
0.4 g |
Electrical System:
| Position Feedback Device: |
Cermet potentiometers or Angle
Displacement Transducers |
| Motors: |
1/3 Hp AC Motors |
| System Power: |
115VAC, 50/60Hz, 1 Phase, 20
amps
or
220VAC, 50/60Hz, 1 Phase, 10 amps |
| Connectors: |
Industrial quality connector
furnished |
| Interface - Analog: |
± 7 VDC per axis for full
actuator movement |
Safety Systems:
If a computer is used for the control of the
system, the software continuously monitors the acceleration, velocity and
position of each actuator. The rotary actuators prevent the motion base from
accidentally "bottoming out".
Options:
| PC Controller |
Motion Profile Software |
| A/D - D/A Converter Cards |
Fail Safe Brakes for Motors |
| Uninterruptible Power Supply |
|
Copyright ©2007 - Servos and Simulation, Inc
All Rights Reserved.
407-262-9042