Six Axis Motion System
Preliminary Design
This six axis motion system is
designed typically for military and commercial applications.
| Applications: |
Features: |
Advantages: |
- Simulators
- Flight Training Systems
- Entertainment Rides
- Medical Research
- Test Systems
|
- ALL ELECTRIC
Actuators
- Totally Sealed Mechanics
- Position Information Available
- Digital Computer Control
- Operates on 220VAC, 50/60 Hz
|
- LOW COST!!!
- Quiet, Clean, Efficient Operation
- Simple Maintenance
- No Hydraulic Fluid
- No Pump Room
- No Plumbing
|
Specifications:
Mechanical:
| Payload Weight |
2,000 Lbs. |
| Payload Center of Gravity |
centered on the motion frame |
| Motion Frame Dimensions (std): |
rectangle, 26" x 36" |
| Floor Frame Dimensions (std): |
84 inch circular footprint |
| Height (std): |
31" to the top of the motion
frame |
| Weight (std): |
2,000 Lb. |
Dynamics:
| Limits of Motion: |
| Roll: |
± 21° |
| Pitch: |
± 23° |
| Yaw: |
± 20° |
| Heave (up/down): |
± 8 inches |
| Surge (fore/aft): |
± 8 inches |
| Sway (left/right): |
± 8 inches |
|
Velocities: |
| Roll: |
± 60° per second |
| Pitch: |
± 60° per second |
| Yaw: |
± 60° per second |
| Heave (up/down): |
± 15 inches per second |
| Surge (fore/aft): |
± 15 inches per second |
| Sway (left/right): |
± 15 inches per second |
| Accelerations: |
| Roll: |
± 140° per second per second |
| Pitch: |
± 140° per second per second |
| Yaw: |
± 140° per second per second |
| Heave (up/down): |
0.5g |
| Surge (fore/aft): |
0.5g |
| Sway (left/right): |
0.5g |
Electrical System:
| Std. Analog Input: |
6 signals, ±7.5VDC each |
| Motors: |
6, 3Hp AC Motors |
| System Power: |
220VAC, 50/60Hz, 3 Phase, 60
amps |
| Connectors: |
Industrial quality connector
furnished |
| Interface - Digital PC: |
Standard Intel Pentium™ based PC |
| Interface - PC communications to
Host: |
Available upon request:
Ethernet, Shared Memory, etc. |
Safety Systems:
Braking system standard on this system.
Copyright ©2007 - Servos and Simulation, Inc
All Rights Reserved.
407-262-9042